Home > Products > Din-rail Mount SSR > Single Phase DC Output SSR > KSODB Series Single Phase DC Output(NC)
KSODB Series Single Phase DC Output(NC)
KSODB Series Single Phase DC Output(NC). KSODB series is a single-phase normally closed DC output solid state realy with ratings of 3 Amps at 0 to 100VDC. This product is designed to be pluggable into industry standard relay sockets to replace plug-in electromechanical relays.
Model:KSODB
Send Inquiry
Product Description
Transistor Output
· Control Voltage: 4-32VDC
· Load Voltage: 100VDC
· Load Current: 3A
· Dielectric Strength: 2500Vrms
· RoHS Compliant
· Plug in installation
· Optional base mounting
· Normally Closed Type
· Control Voltage: 4-32VDC
· Load Voltage: 100VDC
· Load Current: 3A
· Dielectric Strength: 2500Vrms
· RoHS Compliant
· Plug in installation
· Optional base mounting
· Normally Closed Type
General parameters
| Name | KSODB Series Single Phase DC Output(NC) |
| Load Voltage | 100VDC |
| Load Current |
3A |
| Ambient Temperature Range | -30℃ ～ +80℃ |
| Storage Temperature Range | -30℃ ～ +100℃ |
| Weight (Typical) | 20g/50g |
Click the link below to download datasheet
General Notes
1. Soldering must be finished within 10 seconds at 260℃,or finished within 5 seconds at 350℃. Otherwise it may cause damage to the relay.
2. Terminal polarity must be observed. Otherwise it may cause damage to the relay.
3. When ambient temperature is above 25℃, the maximum load current decreases. See thermal derating curve.
4.Capacitive load will produce very high surge current at the moment of conduction, which may lead to the damage of solid state relay due to the excessive surge current. Therefore, if the actual load is capacitive, or the load has parallelled large capacitance, it is strongly recommended that NTC should be connected in series in the load loop to suppress surge current in order to avoid damage to the product.
◆Product specifications are subject to change without notice. Please don’t hesitate to contact with us for any technical questions.
2. Terminal polarity must be observed. Otherwise it may cause damage to the relay.
3. When ambient temperature is above 25℃, the maximum load current decreases. See thermal derating curve.
4.Capacitive load will produce very high surge current at the moment of conduction, which may lead to the damage of solid state relay due to the excessive surge current. Therefore, if the actual load is capacitive, or the load has parallelled large capacitance, it is strongly recommended that NTC should be connected in series in the load loop to suppress surge current in order to avoid damage to the product.
◆Product specifications are subject to change without notice. Please don’t hesitate to contact with us for any technical questions.
Hot Tags: KSODB Series Single Phase DC Output(NC), China, Manufacturers, Suppliers, Factory, Quality
Related Category
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
